The Dewalt DS3532 is a
3500 PSI pressure washer. It is fitted with a 3/8-inch high pressure
hose. You can find this model for an average price of $800. Keep reading
to learn about some of the features that it offers.
Engine
The
Dewalt DS3532 pressure washer is powered by a commercial Subaru pressure washer engine
that offers 265cc of displacement. The unit has a maximum operating
pressure of 3,500 PSI and can move water at a rate of 3.2 gallons per
minute. The fuel tank to power the engine can hold up to 1.56 gallons of
gas at a time.
Hose
The Dewalt DS3532 is coupled with a
3/8-inch high pressure waher hose. Measuring 50 feet long, it offers you the
utmost maneuverability. The heavy-duty hose is non-marring and offers
quick connectors for easier nozzle changes.
Wand
The
Dewalt DS3532 pressure washer is packaged with a two-piece pressure washer gun and wand.
This offers you more comfort and reliability. The tool comes with five
different connectors. They include 0, 15, 25, and 40 degree nozzles as
well as one designed to apply soap. The unit also offers onboard storage
space for the accessories.
Transport
You will like the
fact that the Dewalt DS3532 is easy to transport. The machine is fitted
with 13-inch diameter wheels so that you can easily roll it around.
There is also a steel handle for an added measure of convenience. This is the best electric pressure washer for home use.
Design
The
Dewalt DS3532 is fitted with a powder-coated steel deck. The handle is
also made from powder-coated steel. The steel frame is constructed of
1.25-inch round tubes. The unit is backed by a three year limited
warranty.
The Dewalt pressure washer offers a maximum
operating pressure of 3,500 PSI. It is powered by a 265cc displacement
Subaru engine. The 3/8-inch high pressure hose measures 50 feet long, so
you don't have to worry about maneuverability.
Spring is the perfect time to get outside and review and renew your landscaping. This article features 10 spring landscaping projects you can do yourself in a day or weekend.
Don't Forget Curb Appeal
Walk down to the street or the end of the driveway and take a look at your front door. It may be a selling point when you put your home on the market, but it also leaves a first impression to everyone who walks by. Replace or repaint worn shutters, clean the front door or repaint if necessary, and clear away any leftover winter decorations.
Clean concrete patios, decks and siding
A good cleaning will make almost anything look new again. That goes for your concrete patio, deck and siding on your house. If you have a best electric pressure washer it is the cheapest and easiest way to clean these surfaces. Test a small area of your wooden deck first so you do not damage the wood. You may need to use cleaner for each particular surface, but in many cases a scrub brush with a long handle and elbow grease is all you need. You can rent AR Blue Clean AR383 Electric Pressure Washer Reviews washer from the big box hardware stores, or a rental center.
Replant Dead Grass
Nothing looks worse than brown spots on your lawn. Spring is a great time to replant those dead areas. Garden center staff can help you choose the correct grass seed for your location. You will also need a rake to take away the dead grass, a pick to loosen the soil, some twine or string to mark off small areas at a time so you do not over seed, some fertilizer, and hay. The hay will keep the birds from eating the seed. Plant grass as directed, and water lightly to soak the seed. Continue to water regularly and in 14 days seedlings will appear.
Plant a Tree, shrub or evergreen
Nothing adds instant appeal to your landscape like a new tree, bush or evergreen. To add color right away, choose a spring flowering tree like a crab apple or tulip tree. For fall impact pick a bush that's leaves turn a vibrant color in the late fall. Burning bushes are a popular choice, with their bright red foliage. If you want all year interest an evergreen is your best choice. They are available in many varieties and sizes, and many are uniquely shaped. Remember to purchase extra soil, a tree stake, and a spacer. You will need a spade to dig the hole twice the width and the same height as the root ball or container. Most garden centers have detailed instructions available when you purchase your tree. Remember to water consistently for the first two years.
Add Bark Chips or Decorative Stone around Landscaping
If you already have bark mulch around your landscaping you have a choice each spring to either add new bags of mulch or remove it all and add decorative stone to your landscaping. Decorative stone is a big investment up front, but it lasts for years and only needs to be raked and wet down to look fresh each spring. It is available at most garden centers by the bag, or cubic yard. A cubic yard will usually cover 100 square feet. Buying by the yard and having it delivered is the smartest way to go when you have a large area to cover. The stone is available in a variety of colors and styles and prices vary according to stone choice. You will need to clear the area to be covered by removing old bark chips, weeding and reapplying landscaping tarp. A wheelbarrow, shovel, heavy metal rake and manpower is all that is required to get a whole new look. Once the stone is in place, usually 2-3 inches deep, you will need to wet it down to clean it. Yearly maintenance may include adding a bag or two in spots where the stone has shifted.
Adding a decorative edge
Adding a decorative edge not only looks clean, it also makes it easier to mow around your landscaping. Decorative edges are available in a wide variety of materials from plastic to rubber and brick. A garden center or hardware store will have a large selection each spring for you to choose from. You will need to measure the area you want to edge around to determine cost of each option. Garden center staff can help you with the DIY information. You will need a spade, some soil and sand. A level is recommended when laying brick.
Solar Lighting adds instant light to the night
Solar lights are a quick and easy way to add interest to your landscape at night. They are available everywhere these days from the corner grocery store to local garden centers and big box stores. Solar lighting is a huge trend in gardens right now and the price of the lights can range from $1.50 each to hundreds of dollars for a full set. Lights come in a variety of options from brass, and chrome to wrought iron. Note that you may only get one season out of the cheaper lights but they are easy to install and move when you want to shift the interest to another area of your landscape. All that is required is a mallet or a heavy hand to push them into your soil. Make sure to remove any papers covering the battery or they will not light.
Perennial Gardens are a money saving option
A great way to save money in your landscaping is to invest in perennial plants. Perennials are plants that will come back year after year, and many offer beautiful foliage along with vibrant flowers. You will need to determine where you want to plant your perennials before going shopping. There is a big difference between plants that grow in the sun and those that flourish in the shade. The best place to shop for perennials is your local farmers market where the selection will be plants that are zoned for your climate. You can ask the farmers what your climate zone is, or check sites such as www.garden.org/zipzone to determine your zone. You should buy perennials that flower at different times of the growing season so that your garden has blooming interest all summer long. Check for height growth of flowers to know which flowers to plant in front of others. Note that many perennials will spread so you should leave room for them to cover as the seasons go by. It is easy to uproot plants and divide them into more plants each spring. Many varieties are very hardy, and will divide easily at any time during the season. Ask your local farmer or garden center staff for help, many are very knowledgeable in what they sell. They will also give you the best advice on how to plant each plant. You can also go on websites like.
Annual Plants bring instant rewards
Nothing will give your garden the pop of instant color like a beautiful flowering plant. Annual plants are, just as their name implies, plants that will last only one season. There are a wide variety of plants available in an array of glorious colors. Garden centers, hardware stores, big box stores, grocery stores and the farmers market all sell flowers in packs or planters. Look for healthy plants that have a number of buds to make sure your plant will bloom for a long time. If you are looking for ideas on what plants look good with each other or how to arrange plants in a planter or container go to your local garden center for ideas. Most will sell already made planters and you can copy those ideas when shopping for your own flowers. Annuals can also be added to perennial gardens that may have nothing blooming at this point in the season, or for low to the ground color. Hanging baskets can be made or purchased and add nice color to a blank wall or fence. Websites like www.hgtv.com, or www.bhg.com are full of ideas and how-tos.
Create a focal point in your landscaping
Adding a small water feature, fire pit, or even a bird bath will add an instant focal point in your landscaping. A multitude of options are available and can create interest or add interest to an area of your landscaping that is in need of a little lift. Glass balls, ceramic statues, wooden benches, bird houses, and trellises are just some of the things that are easy to add. Planter boxes filled with annual plants are a great way to add appeal to a fence, and even look terrific on the mailbox post. Seating areas in remote corners where nothing seems to want to grow also enhance your landscape. Be creative, the options are endless.
As the weather gets warmer there are many projects you may find your self needing to complete. Some projects should be looked at once a year typically each summer. VisitElectric Pressure Washer Reviews 2015 to see more informations.
Project #1- Decks
You will need to give your deck a good cleaning and check for any water damage from the winter. They make scrub for the decks, scrub your deck with this and let dry one day. Then you should apply a fresh coat of sealer providing there is no water damage to the deck. If there is water damage then you may want to sand it and refinish it. Then each year apply the sealer to it and you should have no more problems.
Project #2- Caulk
Caulking is something that should also be done once a year. You should caulk around the exterior joints and around the windows. Just because its warm out doesn't mean you wont need to do this. In the summer you are trying to keep the warm air out and this is a vital place that air seeps in from. Don't forget to caulk around the doors also. This seems to be a place people forget and its one of the most important spots. Caulking around these will also help keep all the summer insects out of your home. This can be a huge issue if a ton of bee's figure out how to get in your home.
Project #3- Concrete
If you have a concrete porch, driveway, patio or walkway you will need to inspect these each year. After the winter months you can almost count on some sort of damage. You have all the snow, sleet and hair mixed with all the salt you throw down, you are probably going to see some cracks. Unless you want them cracks to turn into big holes then I suggest fixing these each year. Cracks in the concrete are fairly simple to fix. As long as it's a small crack you can buy concrete caulk. You will need to clean the crack out very well. The best way to do this is with a pressure washer hose reviews. Once its clean let dry. After you have done that you can apply the concrete caulk and let dry. If the crack is pretty large then you will need to buy concrete patch instead if caulk.
Project #4- Siding
If you have any lose siding from the winter winds then you should fix these during the summer. You could fix them in the winter months to, but I find if you wait for the summer months then you will be more likely to fix them better then you would have in the winter. Its pretty cold in the winter and you try and get things done fast, and may not do them correctly. If you have access to a pressure washer then I would get it and Campbell Hausfeld electric pressure washer reviews wash your home. Make sure you use detergent that is made for your home as you don't want to spray any paint or anything off your house. If you have windows that you can not reach, then use outside Windex. They make a kind that hooks right to your hose and makes cleaning windows fairly easy.
Project #5- Vents
If you have a gas dryer in your home then you should clean out the entire vent system. Take the lint trap out and scrub it. Even if you empty your lint each time you use it, doesn't mean its clean. Hold your trap under running water. Notice that the trap looks clean but how come the water wont go through the holes. That's because there is a film left behind that wont come off unless you scrub it. Clean out the exterior vent cap also. These can get pretty gross through the winter months and could become a fire hazard. Along with the dryer most people have roof vents. You will need to get there once a year and clean them vents to. They will probably be full of debris and who knows what else. Cleaning these once a year or more if needed will help your home vent properly.
We all love getting a bigger and better deck added onto the house, until the day comes that you have to stain all that extra wood. I think when it's done right, a stained deck not only last much longer, but looks great for years. I think you should use a AR Blue Clean Pressure Washer Reviews 2015.
We had our rickety side deck removed and replaced it with a much wider and heavier deck that went to the back of the house and connected to our larger deck. The back deck , also in bad shape, and wobbly from being ten foot off the ground with 4x4's supporting it that weren't cemented in or nailed down was twice as stable now too. The porch looked great, but I was eager to give it a little color once the wood seasoned the first year. I knew it was a big job, but I didn't prepare for the mistakes that I was about to make ahead.
My first mistake was choosing a cheaper, but faster way to apply the stain. After some research I figured the bean sprayer was the way for me seeing that I had two lying around. I needed to pressure wash the whole deck first and let it dry. The back deck having new rails and some boards replaced was off colored already, so the pressure washing was extra important for blending and removing the eight years of mold and aged stain. I used a smaller 1100karcher electric pressure washer reviews which worked fine when new, but would suggest for better time, rent or borrow a larger one from a friend. After, a couple of sunny days it was time to apply some stain.
Cedar stain is always appealing to me at first glance, but from experience, I know the color doesn't hold well and appears dreadfully red when done. Now I prefer a nice oak or lighter cherry color that will fade naturally without any apparent splotches. One mistake I made as usual is underestimating the amount of stain I would need, due in part to that bean sprayer, but more on that later. Just to note, make sure you have paint thinner and different size brushes on hand for the cleaning up and the touch ups that are expected. Let's get back to that bean sprayer. The sprayer started off nicely with an even spray and making good coverage, but it was a hot day and before long I noticed the quality of my coverage was diminishing fast.
The tip was clogging up with dry stain that caused me many hours of removing the tip to soak in thinner or bang dried stain out of. I'm a relatively patient person when it comes to projects, but besides cleaning the tip of the sprayer, I spent a lot of time filling and pumping the sprayer. When the pressure would get low, the width of the spray and mist would start streaming. This caused for a lot of waste and an arm workout. The porch turned out nice as you can see in the pictures, but in addition to the other tribulations was a bigger mess, overspray. In all, I ended up with 6 five gallon cans of Thompson's wood stain from Wal-Mart, of which I have about half of one left under the house. Of those cans, one full can is now applied to my shed, mower, yard, and most of the vinyl siding around the house.
I figured on some overspray and we used cardboard wedged in around the top to protect the siding, but with the quality of the sprayer and my desire to finish, I just stopped caring at some point. It has faded on the vinyl siding some, but now I have a large cage out back made of wood, and this year is when we should stain it. This time I will shop for a quality sprayer that is designed for stain with a larger tank, and I plan to have old blankets, cardboard, plastic and tape on hand. In addition I will work one section at a time to ensure any overspray isn't staining everything I own. Leave the bean sprayer for something small.
Are you experiencing water pressure issues in your home? If so, you may want to test your home's water pressure yourself. It is easy enough to do and it will help you determine what corrective actions to take. Here's how to do it:
Checking an Existing Water Pressure Test Gauge
There are two ways to test your home's water pressure. If you have a well, there is a good chance that your home's water system has already been outfitted with a water pressure gauge test. In that case, all you'll need to do is read the gauge. If your home's water supply does not have a water pressure gauge test, you'll need to install one.
Installing a Water Pressure Gauge Test
Installing a water pressure gauge test is a rather uncomplicated and inexpensive affair. First, you'll need to purchase one from your local plumbing supply or home improvement store. It will cost you roughly $11. After you have the water pressure gauge test in your possession, locate the faucet nearest to your home's main water supply. I'd suggest that you consider using your garden hose spigot. Once you locate a spigot, simply screw the water pressure gauge test onto the spigot and watch the dial.
Tips for Keeping a Log
If you do decide to test your home's water pressure, I'd suggest that you keep a log of your readings and analyze your findings. You may also want to consider taking multiple readings at different times of the day for at least a week. If you have the time to spare, I'd suggest that you take water pressure readings for a month. That way you can look for patterns. For example, let's pretend that your home's water pressure reduces drastically at noon every Tuesday. It could be that there is something going on in your city on those days that is affecting your home's water pressure. Whereas, if your water pressure is low all of the time, it could mean that there is something wrong within your property, like a leaky pipe.
Possible Solutions
Once you have a good idea of what your home's water pressure issues are, you can decide upon a course of action. Options include making adjustments to your well's pressure switch, installing a pressure-reducing valve, removing a pre-existing pressure-reducing valve and increasing the elevation of your home's water supply tank.
For many motorcycle riders, their method of washing a motorcycle is running it down to the dealer and paying a hundred dollars for a motorcycle detailing job. For me, I'd be out thousands of dollars a year if I went with that option simply because I ride so much and am fearless about my riding. I'll even choose to ride in the rain and my bike shows it; with water spots on the chrome and dirt everywhere. I also choose to wash my own bike to make sure that it is done correctly. When I had the front tire installed on my bike, they threw in a free wash and I was not happy with the results. Aside from the job being sloppy, it was obvious they hit it with a pressure washer which is a big no-no for a couple of reasons; especially if used without discretion. Because of this experience, I won't pay to have it washed ever again and have come up with a cleaning method that is safe for the bike, quick for me and borders on a detailing job as well. Throughout this write up, I'll be referring to this slide show, so open up a separate browser window and enjoy the journey.
Coin Op Car Wash is Your Friend
I'll admit that my bike is dirtier than it has been in a while. (See slides 1 through 6) I managed to get through the spring with one wash and now that its summer and the chances of rain are dropping, it is time to give it a good wash. I also need to water my lawn soon and there is no quicker way to encourage rain than to tempt the rain gods with a clean bike on the road. My preferred method of getting the grime off a bike is to arm myself with a few dollars in quarters and hit the coin operated car wash. I don't own a pressure washer and honestly the brush thing they have, if clean, works better than the sponge/shammy I have in getting grime off. The other benefit of the coin-op is that you can clean your bike in the shade, which makes the entire process much easier; not to mention cooler.
The car wash near my home is pretty well maintained; however, I try to avoid the stalls that are really dirty. If I see a bunch of mud on the ground, it could splatter when I'm cleaning, or I could hit it when I drive out. First thing I do after I put my money in is to turn the knob to the high pressure soap; not for my bike but for the brush. (See Slide 7) I make sure I hit the brush thoroughly, as it could have dirt or grease on it and its better to spend a quarter's worth of time on cleaning it than dealing with that dirt and grime being on my bike. Then I turn the knob to the low pressure pre-soak. I hit the entire bike with this and focus on areas of the bike that are really dirty, especially the fenders. (See slide 8) I take care to not directly spray even the low pressure water at the spark plug area though; this can be hand detailed later.
After pre-washing the bike, I give it a good suds with the now-clean brush. (See slide 9 and 10) This should be done carefully to prevent catching the brush on brake lines and other parts. From here, a rinse with low-pressure again and then use the spot free low pressure rinse and you are done spending money on the bike washing process.
Before moving to the next step, I used a shammy cloth to dry off the bike. (See slide 11) It helps get any missed dirt off the bike and getting all the water off at once prevents water spots completely. As you can see in slide 12 and 13, I could probably have gotten away with stopping there but it is important to keep a bike waxed as well since it helps keep bugs and grime from sticking nearly as easily.
Waxing, Cleaning Chrome, etc.
My trick after this is to use a waterless cleaner/waxing product. (See slide 14) The one I bought was purchased by a random vendor at a random gas station but there are national brands that make similar products. Honestly, if the bike is only a little dirty, I won't hesitate to just use one of these products rather than going through the process of the car wash. The nice thing about these products is that the bike is clean and waxed and they also work to get cooked on bugs off and work great on chrome and on my lexan plastic windshield, provided I have gotten off any gritty material prior to using it.
The instructions on these products are pretty much the same as well; however, I have found from trial and a lot of error that the best application method is to spray the product onto the cloth you intend to use. My product suggests a terry cloth towel for the first step, however, I have found the tighter weave of an old t-shirt or cloth diaper works better for the application. If you are using these products on a car, the overspray is no big deal. On a bike, it means overspray in areas that even smaller hands can't reach or right onto the section of bike you already tackled.
What I do is go around and find any and all dried on bugs and pre-spray those areas directly and up close to prevent overspray. I'll leave these areas for last to let the spray work and reduce the amount of elbow grease needed. Then, I start at the top of the bike and work down. The inside and outside of the windshield first, then the fairing, then I pretty much work from front to back. I clean the entire bike first using the old t-shirt and as much as my OCD wants me to buff each section as I go, it is quicker and easier to buff everything at once. Slide 15 is of a section of the bike post cleaning and pre-buffing. Slide 16 is that same area after.
Once I am done cleaning and have gotten the trouble spots taken care of, I then proceed to buffing. The easiest and quickest way to do this is with a polyester microfiber towel. They are available in automotive care sections now because they work great on paint and chrome and combined with the wax in the spray, really make a bike or car shine. I go over the entire bike in the same order I did when I did the application, top to bottom and from front to back to make sure I get every spot. The nice thing about the microfiber towel is that there is no actual buffing; just a quick wipe over of the area and it's shiny.
As you can see from the slides 17-20, the bike looks almost as good as it did the day it was driven off the showroom floor. Slide 21 shows how bad it was before and how good it was afterwards. It took me 45 minutes and about five dollars in quarters. Even at a lawyer's hourly rates, it becomes hard to justify paying for a bike detail.
Specialty Mildew Remover Vs. Household Bleach: Comparing How Each Removes Mildew
Buying gallons of mildew cleaners is a waste of money. Some selling for as much as $20 per gallon such as Zinsser's JoMax House Cleaner and Mildew Killer, which is widely available, just don't work as well as standard household bleach, in my experience.
After spraying on the undiluted liquid (one jug of concentrated JoMax is supposed to be diluted to make up to 20 gallons of cleaner, according to its label), letting it soak in and then spraying it off with a pressure washer, the black mold spotted decking boards came out looking just the same as the untreated wood. There was no visible difference.
In addition to not working well as a mildew cleaner, Zinsser's JoMax contains the active ingredient Sodium O-Phenylphenate, which has been identified by the U.S. Department of Health and Human Services as having some potential health risks. According to their Household Products website, even diluted this ingredient can lead to white patches on the skin and increases of tumors in animals.
In comparison, Clorox Bleach has no carcinogens or other health hazards (as long as it isn't ingested). If it starts to irritate your eyes, just flush them out with a little water.
Plus, bleach works to clean wood or vinyl and removes mildew. Diluted or not, spraying on bleach, letting it set for just a minute or two and then washing it off with water, you will find that mildew covered wood decking is instantly free of those troublesome black spots and is instantly brighter. Leave the wood to dry and it is ready to receive a fresh coat of paint or stain.
Diluted bleach works well when sprayed on to vinyl house siding to remove the green mildew and mold that often accumulates on the bottom and side exterior walls, as well. Be mindful of the direction that the wind is blowing when spraying on bleach and then washing off the mildew because breathing in all that growth can irritate your throat and lungs.
When using bleach as a mildew cleaner, you'll see visible globs of sludge accumulate, so put down a tarp if you'd like to have easy clean-up after the job is done. Working on a warm day will allow for a quicker dry time and for you to be able to see the sections of wood or vinyl that have been sprayed and those that haven't. If you don't have a spray bottle, dipping a brush into the diluted bleach solution and scrubbing will work as well. Clean up with water after and your project is done.
